Description Features of AneSure Portable Multigas Monitor AneSure Mini Portable And Lightweight Suitable for emergency, pre-hospital, and intra-hospital transfer, operating room, and ICU, enhancing the safety of anesthesia Alarm For Data Overrun And Suffocation Quick warm-up with the first value displayed in 5 seconds, and accurate readings displayed in 15 seconds. 24-hour trend graphs, not lost when power off Large Character Mode The data can be seen from 5 meters away; Turn on the unit, and it is ready to use instantly with no need to calibrate; Automatic atmospheric pressure compensation; Economical adapters reduce usage costs. Firm And Durable Suitable for various medical environments (field, helicopter, etc.) Specifications of AneSure Portable Multigas Monitor AneSure Mini AC Input 100V -240V, 50Hz/60 Hz to 5VDC Adapter with 5V type-C USBadapter Cable. Battery Built-in rechargeable lithium battery pack (3.7V, 1200mAH) Temperature 5 to 50℃ Humidity ≤80% Atmospheric pressure 55 – 115 kPa Technique NDIR (Non-dispersive infrared gas analysis) Sampling Mode Mainstream EtCO2, FiCO2 measurement Range: 0 – 150mmHg or 0 – 20kPa or 0 – 19.7% (v/v) Accuracy: ±2mmHg for CO2 range 0 – 40mmHg ±5% for CO2 range from 41 – 70mmHg ±8% for CO2 range from 71 – 100mmHg ±10% Over 100mmHg Update/Averaging Time Option of every breath or 10, 20 or 30 seconds FiN2O/EtN2O measurement Range: 0-100% Accuracy: ± (2 vol% 2% of reading) FiHAL/EtHAL, FiENF/EtENF, FiISO/EtISO measurement Range: 0-12% Accuracy: 0-8%: ± (0.15 vol% 5% of reading); 8-12%: unspecified FiSEV/EtSEV measurement Range: 0-15% Accuracy: 0-10%: ± (0.15 vol% 5% of reading); 10-15%: unspecified FiDES/EtDES measurement Range: 0-25% Accuracy: 0-18%: ± (0.15 vol% 5% of reading); 18-25%: unspecified All FiAG Update: every 2-3 breath Trends: 24 hours on Screen Trend and Numeric Atmospheric Pressure Compensation Auto-compensation for atmospheric pressure variation Respiration Rate Range: 3 – 150 breaths/minute Accuracy: ±1% of reading or ±1 breaths/min whichever is greater Rise time CO2 is less than70ms; N2O is less than300ms; Anesthetic gases (halothane, enflurane, isoflurane, sevoflurane, or desflurane) are less than 300ms Warm Up Time <15 seconds Agent threshold 0.2%, When an agent is identified, concentrations will be reported even below 0.2% as long as apnea is not detected Alarm limits Apnea alarm limits:15-40 sec High alarm limits EtCO2/ FiCO2:22-150mmHg Low alarm limits EtCO2/ FiCO2: 00-60mmHg High alarm limits FiHAL/EtHAL, FiENF/EtENF, FiISO/EtISO:1.0-8.0% Low alarm limits FiHAL/EtHAL, FiENF/EtENF, FiISO/EtISO:0-6.5% High alarm limits FiSEV/EtSEV:1.0-10.0% Low alarm limits FiSEV/EtSEV:0-6.5% High alarm limits FiDES/EtDES:1.0-18.0% Low alarm limits FiDES/EtDES: 0-6.5% High alarm limits FiN2O/EtN2O:26-100% Low alarm limits FiN2O/EtN2O: 01-78% The high alarm limits of respiration rate:4-150 breaths/min The low alarm limits of respiration rate:0-140 breaths/min Size 38 x 42 x 44mm (W x H x D) Weight 80g (including lithium battery and adult airway adapter) Airway Adapter Dead Space: 5ml (Adult/Pediatric) 1ml (Neonate) Warranty & Maintenance/ Calibration One-year warranty on the Main Unit and Lithium Ion Rechargeable Battery Application Scenarios of AneSure Portable Multigas Monitor AneSure Mini Portable, accurate, and real-time anesthetic multi-gas monitor AneSure-Mini can simultaneously measure anesthetic gas, ETCO2, and respiratory rate. It is suitable for Emergency, Pre-hospital, and Intra-hospital transport, Operating room as well as ICU. It has an alarm function, which will alarm when the measured value reaches the alarm limits or when suffocation occurs. The first data can be obtained within 5 seconds after power-on, and full accurate data can be obtained within 15 seconds; the 24-hour Etco2 graph will not be lost when power is off. It has a large-character display mode, and the data can be clearly seen from more than 5 meters away. It is ready to use after the power is on. With simple maintenance and a sturdy structure, suitable for various harsh environments.
